Easy Peanut Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

If your peanut brittle reached 311°F but is a pale milky color, it's likely the candy cooked too quickly. It reached the correct temperature but didn't cook long enough to undergo sufficient Maillard reactions and develop the characteristic brown color and rich, roasted flavor. Next time, cook at a lower temperature.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

Just as in homemade syrup or caramel corn, baking soda causes a unique chemical reaction (basically a lot of rising foam) that is crucial in creating the right texture in peanut brittle. If you make it without baking soda but you will notice the brittle is a bit harder to bite through.

Water: Water helps the sugar completely dissolve. Salt: A pinch of salt enhances the other flavors. If you opt for salted butter, you can skip this ingredient. Peanuts: Of course, you'll need peanuts for this classic treat!

If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready. Mine took 18 minutes to reach the correct temperature, so around 15 minutes start trying the water test.

Not spreading the mixture thinly enough: If the peanut brittle is too thick (usually because you used too small of a pan), it may not cool and harden properly. Be sure to spread the mixture as thinly as possible in the pan. 4. Humidity: Humidity can affect the hardening process of the peanut brittle.

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

A more hands-on meal would mean a washing-up break, but simply pouring your peanuts into the co*ke bottle allowed for a protein boost that you could sip while working. Since then, the salty-sweet pairing of sugary co*ke and savory peanuts has spread across the South, from the Carolinas all the way to Texas.

Can you use parchment paper when making peanut brittle? ›

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

How long will homemade peanut brittle last? This peanut brittle recipe will keep for up to 2 months if stored in an airtight container in a cool, dry place. I recommend placing pieces of wax paper or parchment paper between the candy pieces to keep them from sticking together.

So, I Googled Salvaging Undercooked Peanut Brittle and followed Tiffany's helpful instructions to throw the pieces back in the pan, turn the heat up and stir, stir, and stir to a raging boil and wait to pour it in the pan until it reaches 300 degrees.

I don't recommend substituting honey, molasses, or agave for the corn syrup. Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

The secret is in the baking soda. As the sugar is cooking and begins turning amber in color it accumulates small amounts of acid, and that acid reacts chemically with the alkaline baking soda releasing about a zillion minuscule bubbles of CO₂ that get trapped, making the sugar porous and, well… brittle.

Put it in a pan on low heat and very slowly melt it. Once it begins to melt you can increase the heat a bit. The trick to this is that you have to stir it constantly in order to keep the peanuts from burning. You're going to want to bring it back to 300F, then immediately pour into the prepared pan.

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

Dried peanuts may require boiling up to 24 hours until they soften. If your water is hard, full of minerals, or you are boiling at high altitude, then your boiling times for dried peanuts may be greater than 24 hours.

How long does it take for peanut brittle to harden? This microwave peanut brittle starts to harden almost immediately once you finish cooking it and stirring in the baking soda. It will be completely hardened and ready to break into pieces in just 30 minutes.